Skip to content

Velo-bits

Velomobiles: aerodynamic bicycles, fully enclosed for protection from the weather and safety. This blog is about riding, maintaining, and customizing velomobiles. .

  • Home
  • About my Velomobiles
  • Contact
  • Improving the air flow in the Milan; air out-flow
  • Designing the air intake for Milan GT
  • Home
  • About my Velomobiles
  • Contact
  • Improving the air flow in the Milan; air out-flow
  • Designing the air intake for Milan GT

Tag: velomobile

New Year 2021- out with the old…

I'm keeping with the New Year's traditional saying: Out with the old and In with the new, by tossing out the old plugs that are no longer needed. Tail, nose, and the wheel pant plug are gone, and I'm moving onto the new part of creating the main body molds~! https://flic.kr/p/2kof6kS Out with the old.... … Continue reading New Year 2021- out with the old… →

sellstatelere Uncategorized Leave a comment January 3, 2021 3 Minutes

Time to customize the WAW….

Nearly all my velomobile rides the last few months have been in the Milan GT; I've been learning the machine and getting accustomed to the ride, as well as getting myself in better riding condition for the season. The WAW had seen little use. On Friday I was going to ride to a local restaurant … Continue reading Time to customize the WAW…. →

sellstatelere Uncategorized 2 Comments July 28, 2019 5 Minutes
Follow Velo-bits on WordPress.com

Pages

  • About my Velomobiles
  • Contact
  • Designing the air intake for Milan GT
  • Improving the air flow in the Milan; air out-flow
Blog at WordPress.com.
Cancel